-
Hi Kevin or anybody -
Perhaps I am trying to be too clever because I decided to use an ATmega328 chip on its own for space saving reasons. I can get the autoguider code to work if I go through the st…
-
Design PCB that can be used to fully control the scooter.
It should have:
- [x] ESP32 microcontroller
- [x] Boost converter for headlight led 5V -> 6V (1.1W)
- [x] RGB display
- [x] Power b…
-
Unfortunately the Majenko SDZL board (so far) is not available, either as a design or a premade board. So I am designing an equivalent SDZL board, with the intention that it will work with the pre bui…
-
I looked on various threads to see how it is with the LED indication I found some descriptions that it changes red for orange if I understand correctly to make the unsynchronization more obvious.
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have se…
-
Completely rewriting it for easier referencing:
Some files have mismatch sizes reported in the [Library page on HB](https://www.humblebundle.com/home/library?hmb_source=navbar) and actual size afte…
-
I built a NixieClock with your instructable but cant write code to the ATMega328P.
What I did is install AtmelStudio6.1, open your project connecting the ARCELI Atmel BEI AVRISP mkii XPII AVR ISP mk2…
-
I'm not sure if this falls under SWC or DC, but I've tweeted a bit about the idea of developing a "hardware carpentry" (HT: Jonah came up with the name). I think there is interest in this. I'll be dev…
-
There is a standard called "pack" files for distributing information about microcontrollers. It contains beside the svd file also information about programming, documentation and examples.
That mea…
-
```
What feature would you like to see?
A wireless Air-Mouse. Interfacing & Programming a Bluetooth module on Linux.
What is the expected behavior?
+ You might want to use an off the shelf bluetooth …