-
How does one keep track of which device is which when hooking it up with the switch. If you only hook up 1 device at at time this is easy of-course, but how does it work if you have a 16 port switch a…
boedy updated
2 weeks ago
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
After replacing a switch module with TASMOTA I found out that the relay is on ADC0 pin and I was unable to use i…
-
### Is there an existing issue for this?
- [X] I have searched the existing open and closed issues
### Is your feature request related to a problem? Please describe
I was looking for the possibilit…
-
### Describe the bug
So steps to trigger this bug.
1. Use make menuconfig to set up a X86 build.
2. let it build
3. After the build is dun open Kernel_menuconfig and close it with out changeing…
-
## Alarm system
EVO HD, IP100
## Environment
RPI
## Git branch
Which Git branch you use. Did you tried "dev" branch? Please try before posting.
## Describe the bug
Periodical connecti…
-
A D-LINK DPN-100 also has an RTL9601C1, I put the pictures above and below the SFP module board for you.
I wanted to try to flash with firmware V2801F but squashfs-tools (extract / repack rootfs) and…
-
When I tried to perform an Attended Sys Upgrade using Luci, after I pressed the green button for `requesting firmware image` I received the following error
![image](https://github.com/openwrt/asu/ass…
-
### Is your feature request related to a problem? Please describe.
Right now, UPNP is, as far as I can find, unsupported for clients. Manual specification of inbound ports also appears to be unsupp…
-
### Describe the bug
On Basebox5, QRT 5, and mANT 19S hardware devices running 3.24.6.0 (also was issue on older versions), it has been found that their time clocks get out of sync by 10s of minutes …
AI7NC updated
2 weeks ago
-
**Is your feature request related to a problem? Please describe.**
I would like to be able to (un)install packages.
**Describe the solution you'd like**
For example, to enable containers, one…