-
Complete initial testing of tides in full physics setup.
Explore min depth criteria
-
Environment:
- python 3.11
- venv (same as HomeAssistant)
- mpp-solar build from source, latest commit on branch master (but other versions same issue)
- BMS connected with JK RS485 adapter to USR…
-
I am trying to interface from an Arduino Uno (Master) with the EPS 2.0 board (Slave) via I2C. I have flashed the firmware, located on the spacelab-ufsc/eps2 GitHub page, to the EPS 2.0 MCU using the p…
-
This is a tricky problem. There are two parts here.
# Part 1: Determining Array Output Characteristics
Consider the following. We have an array of X modules in series, without bypass diodes. We ap…
-
This is an issue to track progress on the axion dark matter hack. Our plan is to do some reading tonight on 4 different astrophysical axion constraints:
* Tip of the red giant branch
* Horizontal …
-
```
# docker run --rm --device=/dev/hidraw1 jblance/mppsolar:latest mpp-solar -p /dev/hidraw1 -c QPIWS
Traceback (most recent call last):
File "/usr/local/bin/mpp-solar", line 8, in
sys.exi…
a-mkh updated
2 months ago
-
hello Sebastian,
do you think its possible to add a sensor to my slit phase inverter to monitor both sides ?
I will like to be able to monitor
grid voltage phase A
grid voltage phase B
grid cur…
-
Hi, I have JKBMS JK_PB1A16S15P
Hardware version V15A
Software V15.27
I cannot read any data from it.
```
$ mpp-solar -p C8:47:80:11:C6:19 -P JK04 -D
2024-07-17 20:05:09,605:INFO:__init__:ma…
-
I have two JK_PB2A16S15P connected to eachother and an RS485 connection to a rpi running this. Hardware ver 15.XA and sw is 15.10.
It connects to the BMS but the values look strange. I use the suppli…
-
Hello,
Is there any chance to add Heltec/Neey balancers over BLE ? As far as i know ESPhome already support those devices:
https://github.com/syssi/esphome-jk-bms/blob/main/components/heltec_balance…