-
Hello Kris,
Since you're an expert at that, I was wondering if you had any recommendation for an easy-to-use yet reliable alternative to the above chips, as those are no longer available. I'm looking…
-
Hi Kris,
I was wondering if you could tell me how to set the offsets if i tilt the sensor 90 degrees down. I will mount the thing vertical in an enclosed box which will go subsea. this position nee…
-
Good afternoon Kris,
First of all I'd like to thank you for all the work you put into this library. it helped me a great deal to get my project going!
I started to re-write my arduino sketch to…
-
Hello Kris,
Do you happen to know where one can download Application Notes for the MPU9250 and AK8963?
It looks like they are no longer available at https://www.invensense.com/developers/ (even tho…
-
Hello,
I'm new to Arduino and IMU and I'm very confused. I'm using an Arduino Pro Mini 5V with the MPU9250 (I used the necessary components to change the tension to 3.3V) and I'm trying to extract an…
-
Hi Kris,
Thank you very much for your efforts.
Any idea on how to ensure that the sensor gives me proper readings regardless of it's starting position and orientation ? The problem is, when I …
-
Hi Kris,
I was wondering if you ever experienced problems with the board stopping responding to i2c messages after some time of operating?
Occasionally after some time has passed, the i2c function…
-
I would just like to start by thanking you for your contributions in regards to the use of the MPU9250.
We have been using the MPU9250 in conjunction with a cc2650 which on our board we have always b…
-
Hi Kris,
I was using your MPU9250BasicAHRS_t3.ino sketch when I saw your comment about the accelerometer offset registers not working properly. ([Line 908](https://github.com/kriswiner/MPU9250/blob…
-
Dear Kris,
I am working on a project which involves the use of MPU9250 in a magnetic environment. Before I state the issue, I will explain the background and set-up of the project for a clear i…