-
I am doing some testings about mac80211 rate control on mt7612e.
In function `mt76x02_send_tx_status()`, there is already some information which will be sent to mac80211 (e.g. `ampdu_len`, `ampdu_a…
-
SoC is MT7621
2.4GHz is MT7603e on pcie0
5GHz is MT7612e on pcie1
After using this commit bc7ce2a1701ca91a58d661fbb3f9ccc3c99bd32e, the 2.4GHz LED is no longer working. It used to work with ffcc…
ghost updated
5 years ago
-
是否可以考虑适配一下JHR-AC860m这个机器呢，这个机器和K2P是同款芯片，只不过WIFI部分是两个MT7615芯片分别个2.4G和5G用。用K2P的固件总感觉有一个芯片没有启动。
-
My hardware:
ZBT WG3526 WiFi router with 5GHz MT7612E WiFi module.
I built and installed the LEDE trunk version.
I am trying to set up a secure mesh using wpa_supplicant the following way:
1…
-
I pulled the latest master branch and then unsuccessfully tried to compile modules for use with my MT7612E. It hangs randomly due to the MCU message time outs with the default module given by my distr…
RavSS updated
5 years ago
-
SoC is MT7621
5GHz is MT7612e
2.4GHz is MT7603e
I am using commit 6203d46fcc4577065209ea0ed9334d89df4f63f7 and the 5GHz seems to work well, but 2.4 is not working. According to OpenWrt and the k…
ghost updated
5 years ago
-
When in client mode (sta) and when connecting to ASUS RT-AC56U Router, and when broadcasting a 5G 802.11ac access point on 161 or 149 (VHT80) MT7612E/ MT76 fails to connect.
The only way to use 149 o…
-
On ath9k/10k the most I see for inactive stations is around 300s. On a D-Link DIR860L I see inactivity times up to half an hour on the 5 GHz radio (MT7612E) only. This leads to client counts being way…
-
Hello,
I tried to use two modules mt7612e together but have no succes. One work good, but second dislpay as mt7602....
-
**Now I use mt76 to connect to a AP that is used as a relay. Find two questions:
1, the speed is very slow, I try to use Ping AP superior MT7688, and sometimes a lot of time delay:**
64 bytes from 119…