-
*anonopenwrt:*
Device: FriendlyARM NanoPi R2S
Openwrt version: 21.02
kmod-usb-net-rtl8152 version: 5.4.143-1
Under load the rtl8152 usb->ethernet controller periodically resets, resulting in los…
-
Can I change the default kernel from 5.4-6.6? for openwrt 21-23? what scripts need to be changed or added?
-
Error building the firmware image
Server response: Unsupported package(s): kmod-nft-nat6
[Please report the error message and request](https://github.com/openwrt/asu/issues)
Request Data:
{
…
-
假如在刚刷好的未扩容的固件中运行更新脚本,会因为脚本下载600M的固件文件到/tmp/upg目录导致系统卡死,并无法升级.
-
### Prerequisites
- [x] I am running the latest version
- [x] I checked the documentation and found no answer
- [x] I checked to make sure that this issue has not already been filed
### Issue …
-
我使用的命令是这个`wget -qO- https://raw.githubusercontent.com/klever1988/nanopi-openwrt/master/scripts/autoupdate.sh | ver=-with-docker sh`,当我按了回车以后直接跳到下一行 什么反应都没有。
![image](https://user-images.githubusercon…
-
希望大神在uboot或者fsbl的固件里面把内存容量和usb的数量提升,多谢啦。膜拜!!!
硬件地址如下:
https://item.taobao.com/item.htm?spm=a1z10.1-c-s.w4023-14577436469.10.7d0d2d56ZRq5oW&id=624490389086
-
r2s0328不能在线升级
![微信图片_20210328082544](https://user-images.githubusercontent.com/79613500/112738647-b2f67380-8f9f-11eb-8ffb-f0132c8c446c.jpg)
-
please add support for nanopi r2s devices, thank you
-
系统原始设置下能正常运行,“网络--接口--LAN”中手动设置旁路由配置(主要是把10.0.0.1改成192.168.X.X)后,点保存并应用无效;在“网络向导”或“系统--设置向导”中可以修改设置旁路由配置,但生效大概3分钟后,系统就无法正常运行,连后台界面都无法顺利进入。
型号:FriendlyARM NanoPi R2S / R2S Plus
平台:rockchip/armv8
出…