-
I looked at the API provided by *Johnny-five*, but couldn't find any information on working with **radios**. Are there any examples of working with sensors like **NRF24L01**. In case I missed a mentio…
-
when using the function "init_nrf24_ptx_registers(uint8_t *address)" and passing an address to the function the TX_address wou't how ever the RX_address will. I have tried to debug this but can't find…
-
Hi,
Thank you for this library wrapper, took me a while to realise I couldn't just hit F5 in Geany programmer and instead had to use `sudo ./server.py` in the terminal after changing the directory t…
-
Greetings from Colombia.
Not a developer, but handy enough with scripting and linux to somehow get BLE capture from TI CC2540 and NRF24.
Wanted to ask you if you would have any suggestions on how to…
-
Subscribe to this issue and stay notified about new [weekly trending repos in Prolog](https://github.com/trending/prolog?since=weekly).
-
Hi I uploded the "nRF24_Network_Router_End_Device_NoLibrary" sketch into my arduino NANO and the "Wireless_Sensor_Network_Coordinator.ino" sketch into an UNO, the problem is that the coordinator recie…
-
I cannot make this library work anymore. On the receiving end, the "available" function always returns true, even if no signal is being received.
Is this library still working? Or is there another…
-
Hi Goebish,
I tried to replicate using pro mini 3.3v + NRF24L01+PA+LNA (10uf capacitor 3.3&GND), i've used a 3.3v regulator to power both and it works fine, i have tested using a test transmit rece…
-
hi , i have one nrf24 for my jr TX , so please is possibile use it with walkera micro hely ? now i use walkera 2401 tx for this walkera micro hely . regards
-
How do I make the spi_uart to work with a periphal? is it intended to replace spi.h?