-
I have gnuradio 3.10.1.1-2. make results in errors:
```
[ 46%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/rtl_tcp/rtl_tcp_source_c.cc.o
[ 48%] Building CXX object lib/CMakeFiles/gnur…
-
I'm trying to run the bladeRF-fsk, and I'm getting the following error:
Failed to set TX VGA1 gain: Operation not supported
Looks like a cool demo. I'm guessing bladeRF-fsk may not be updated fo…
-
i try to update code for using sample rate = 122.88Mhz but i have issues so Could you please update python code and make it available for the public.
Thank you
-
It's been reported that the direct sampling mode using the ADC with the XB-200 is not working well or even at all. This is just to collect all the information and assign someone to look at the issue.…
-
hello
I'm using bladeRF-cli and i'm trying to set the bladeRF sample rate to 61.44M in both RX channels.
I'm executing the following script
`set frequency rx1 2.45G
set frequency rx2 2.45G
…
-
I tested on multiple bladeRFs and I always get errors on my raspberry pi 5
```
Jul 22 15:20:16 pi sh[54887]: [ERROR @ host/libraries/libbladeRF/src/backend/usb/nios_access.c:68] Failed to send NIOS …
-
I'm using a 10 MHz external reference and need the bladeRF to enable the PLL so it considers it. Given `setClockSource` does nothing by default and I didn't find any option to enable the PLL, I had to…
-
When running modes_gui, the GUI will open, but switching to the osmocom source, it crashes with the following error. I've test this with a RTLSDR and BladeRF with the same result. modes_rx works fine…
-
Good day,
Could you help me? I downloaded the following files: **model_setup.m**, **bladeRF_MIMO.m**, **bladeRF_MIMO_Simulink.m** and **bladeRF_MIMO_XCVR.m**, and I am using the **2024** bladeRF ve…
-
hello! i have a bladerf x40 that seems to boot fpga(3 leds at bottom lit green), but all communication to the fpga fails between the fx3 and the fpga with a time out. bladerf -v debug -i doesn't give …