-
At the moment the stm32-rs organisation is just a loose bundle of various STM32 related repositories and crates without any overarching governance, teams or rules. This leads to varying quality and co…
-
Is it possible to user network interface on this devboard?
From micropython docs:
```
To use this module, a MicroPython variant/build with network capabilities must be installed.
```
I don't see…
-
#### Description
TCP client cannot send read only data
#### Steps to reproduce the issue
hardware:stm32f407ze
usemodule:stm32_eth
test ipv4 tcp client send const data like this "const char …
-
Hi,
I have tried to implement Micropython as a Task in FreeRTOS on a NUCLEO-F767ZI Board. It compiles and run fine until I execute any Python Line in REPL mode (e.g. print('hello world')). During by…
-
Hi
Please can you advice where the SPI pins are.
On the PCB it has printed SCK=io5, MOSI=io27, MISO=io19
How do I physically connect to these pins? I can't see any pin outs on the board with th…
-
work
Flash_Jpg_DMA.ino
view bgr to rgb
TFT_eSPI\TFT_Drivers\ST7789_Init.h
code
```c++
config
#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
or
#define TFT_RGB_ORDER TFT…
-
### Describe the bug
Using the zenoh-pico example`z_pub.c` crashes with the following
```[00:00:02.011,000] net_config: Interface 1 (0x20001d74) coming up
[00:00:02.012,000] net_config: IPv4…
-
### Discussed in https://github.com/zephyrproject-rtos/zephyr/discussions/75077
Originally posted by **RobMeades** June 27, 2024
I'm testing the move from 3.6.0 to 3.7.0 and one of our tests…
-
When compiling with Wcast-align and build traged beeing THUMB a huge number of warnings is shown.
RIOT uses Wcast-align by default i switched it of for the libwarm.a generation.
```
core/shared…
-
e.g., https://www.st.com/en/evaluation-tools/nucleo-f767zi.html