-
### The problem
When upgrading to 2023.10.1, my display gets blank.
I use:
```
i2c:
sda: GPIO21
scl: GPIO22
frequency: 400kHz
scan: true
display:
- platform: ssd1306_i2c
…
-
Continued from https://github.com/embedded-graphics/embedded-graphics/issues/671:
> Sorry if I wasn't clear earlier in the thread; I think your list of 4 displays is a good one:
>
> * SSD1306…
-
### Contact Details
_No response_
### What format of the book has this error? You may select more than one option.
Print
### What language of the book has this error?
English (EN)
### Page Numbe…
-
https://articulo.mercadolibre.com.ar/MLA-832803465-display-oled-091-pulgadas-128x32-ssd1306-i2c-blanco-arduino-_JM#position=13&type=item&tracking_id=7bd1be4c-7612-42dd-a3ab-3c86dcb8263a
-
I tried having the file simply in /home/pj but it didn't won't even I tried to run after reboot manually. Now I have it in oled dir with other files like PixelOperator.ttf and the script will start if…
-
When running pi_logo.py from the examples I get the device info but the screen show for 5/6 static noise and only showing from the top a part (1/6) of the raspberry pi logo scrolling right to left?
I…
-
Hi,
I am trying to combine an OLED display with a RFID reader. The OLED should give status informations about the user. I used the procedure described here (https://www.raspberrypi-spy.co.uk/2018/04/…
-
My project can use several displays and an SSD1306 OLED display is not mandatory. But if I try to call the `begin` method, it freezes my firmware as I use your version I²C. So I have no practical way …
hlide updated
3 years ago
-
My set-up consists of:
DS011
OLED SSD1306
DS18B20
BME280
The OLED currently limits to four displays, e.g. Device Info, SDS011, BMP/E280, WiFi Info. If I exclude the BMP/E280 device, the DS18B20…
-
Hello.
I decided to replace the oled display with a larger one from 0.9 to 1.3 inches. Unfortunately it doesn't work properly - I've attached a photo. I checked the display with Arduino and the u8gli…