-
Add MQTT subscribe function that interrupts the main loop when an alarm message is received.
-
![image](https://user-images.githubusercontent.com/6279965/109404732-8282d180-792e-11eb-85c2-41479320ec7d.png)
-
If a device is running for many months it might fall behind on the version of the firmware it is running.
As part of the ESP32 power up / activation process, the board does a firmware version check. …
-
The v1.30 firmware runs silently in STA/LTA mode, just holding a 10 second FIFO queue.
It also subscribes to a MQTT_TOPIC_SENDACCEL topic
```iot-2/cmd/sendacceldata/fmt/json```
which, if published …
-
To allow for non-Watson IoT connections (eg. Mosquitto MQTT), it would be good to have a variant of the[ Watson IoT firmware](https://github.com/openeew/openeew-sensor/tree/master/firmware/WatsonIoT) …
-
This is a discussion for what the LEDs could indicate on the sensor board, to help users understand the status of the device.
**Connection indicators**
- [ ] breathing DIM CYAN: searching for WiFi…
-
- [x] Add API routes to handle onboarding
- [x] Add UI
-
The current firmware transmits all accelerations (31.25 or 125hz) every second to the MQTT server. However more than 99% of this is not useful data because it include non-earthquake accelerations. Red…
-
krook updated
3 years ago
-
Detected 1766 ESLint reports and/or crashes.
Scanned 5397 repositories.
Reached maximum result count 50.
Showing 50/1766
Rules:
- `no-arrow-function-lifecycle`
Click to expand
## Rule: no-…