-
**Describe the bug**
RSP1 Msi2500 board only works for seconds on GQRX and SDR++
**To Reproduce**
I tried with RTL-SDR dongle V2 and RSP2pro with GQRX and they work ok.
Then I replace the SDR wi…
-
Someone should look at writing a tool to unify all the different versions of kalibrate, probably using gr-osmosdr. Also, if there are some other known stations similar to NOAA WX, those could be added…
-
Raspberry Pi 3 with Raspbian OS 2016-05-27-raspbian-jessie.img, [headless setup](https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=74176) and VNC
sudo apt install gnuradio
sudo apt install gr-os…
-
I am trying to get a HackRF to work with GNURadio that comes in the RadioConda (02/07/2022 release) running under Windows 10.
With the Soapy HackRF Sink get the following:
File "C:\ATSC_Testin…
-
hi, i-m trying to receive iridium data but the bandwidth that i obtain is 0... someone could help me?
root@sdr-GL552VW:~/gr-iridium# iridium-extractor -D 4 examples/airspy.conf > output.bits
gr-os…
-
Hi.
I'm trying to compile master gr-sdrplay3 and everything works, however after doing a make install and running gqrx I'm not able to see in builtin source types sdrplay, while typing in Other sdrpl…
-
On a fresh install on a raspberry pi 3 model B+, the GRC script refuses to run, throwing 2 alternating errors:
*** Error in `python': corrupted double-linked list: 0x00fe4820 ***
*** Error in `p…
-
I am using gr-osmosdr with my SDRplay RSP1A and Gqrx Software. Things are going very well, with one exception:
When Gqrx is started and the device is running, I can change the frequency-correction as…
-
Hello I am trying to build gr-BladeRF for the source by following the procedure on the github:
git clone https://github.com/Nuand/gr-bladeRF.git
cd gr-bladeRF
mkdir build
cd build
cmake ..
make …
-
##### Expected Behavior
I would expect bias tee to be a separate option, and not tied to the sample rate setting.
##### Actual Behavior
RTL-TCP is setting bias tee to the same value as sample rat…