-
I'm reading through the code and wondering if parameters handling in some cases is a bug or a feature.
I. `no_rot` in https://github.com/OSGeo/proj.4/blob/master/src/PJ_omerc.c#L125
Shouldn't it b…
-
It would be great if these two commands (M17/M18) could be implemented in GRBL such that M17 enables power to the stepper motors, and M18 disables power to the stepper motors.
I know that current by …
-
As requested, I made a branch to add support for a PCBScriber (described [here](http://reprap.org/wiki/PCBScriber)). It's the "pcbscriber" branch.
I shifted most of the burden to the [g-code genera…
-
Hi there,
I just pulled my hairs for half a day trying to figure this one out, I have been using Grbl for a long time with pen plotters using M3/M5 to print with a solenoid, and after reading about t…
-
I made a plate and wired it in no issue. Go to Probe tab and after positioning Z near plate, hit probe and it lowers until it touches the plate and stops. So far so good. Right now I'm just doing Z…
-
Usually, "image" refers to a bitmap. We should consistently use terms that do not imply bitmap, like "document," "drawing," or "painting"
"Open an example image" -> "open an example drawing"
"imp…
oskay updated
8 years ago