-
Current model is unable to process the .pgm images. While the actual grounding DINO model can process these type of images(Tested on the colab notebook https://colab.research.google.com/github/roboflo…
-
```
On Linux box is started an PGM sender that does chunking for approx. 1MB buffer
into chunks of 1500 bytes and then tries to send these chunks to the PGM
receiver on another Linux Box (also using…
-
So I wrote some PGM using a C++ library found here: http://people.sc.fsu.edu/~jburkardt/cpp_src/pgmb_io/pgmb_io.html
My image viewing program can see it fine, and so can other applications I'm usin…
-
_From @bobc on December 10, 2016 12:31_
Arduino IDE 1.6.8
Arduino AVR Boards 1.6.10
Arduino SAM Boards 1.6.9
On Mega2560, the following sketch compiles OK:
```
void setup() {
// put you…
-
for debugging, it would be extremely helpful to be able to dump the current `pnt-lut` state.
-
Using a pub-sub model to send and receive message, the Wireshark can get the PGM package on my subscriber computer, but the subscriber seems to stop at const int nbytes =zmq_msg_recv(msg.handle(), _ha…
-
I tried to compile pgm with litmusRT(linux-4.9-litmus)，but I got lots of errors as following:
```
tools/pgmrt.cpp: In function ‘void work_thread(rt_config)’:
tools/pgmrt.cpp:420:8: error: ‘struct r…
-
Would be great to display some info for PBM/PGM/PPM images. It seems to be a very simple [file format](https://en.wikipedia.org/wiki/Netpbm).
-
After doing a full build of https://github.com/IBM/bob-recursive-example, if you run makei b AGAIN (with no changes), the following rebuild
1. SAMPLE.BNDDIR
2. VAR300.MODULE
3. FVAT.SRVPGM
4. OR…
-
## Alarm system
EVO192 (V6.86) + IP100 (V5.1) + Hassio
baudrate 57600+ "System Options -> Communication -> “Transmit zone status on serial port” " activated
## Environment
- RPI + Python versio…