-
Hi everyone! i am an owner of orange pi 3 LTS, i am doing very well, however i can't figure out how to create a script to be able to command the activation of the cooling fan. the problem is really in…
-
#### Overview of the Issue
Is the Zero 2 W supported? I have tried the premade image for the pi3 but the zero 2 won't boot with it. I have tried Pi OS Lite 64bit Bookworm and Bullseye. They both han…
-
With the shortage of affordable Raspberry Pi hardware, I've decided to try Le Potato. (Libre Computers Pi 3B+ clone) This board is Raspbian compatible, has the same cores with higher clocks, and more…
-
On march, 24 2020
After logged in on mega, the download procedure finished ok, but balena etcher can't handle the zip file. "Something went wrong while opening pandapi3_20200307.zip
Error: Can't…
-
By visiting the following page using Chromium (Version 48.0.2564.82 Built on Ubuntu 15.04, running on Raspbian 8.0, with hardware acceleration for WebGL), and setting the renderer option to "WebGL", m…
-
Installation OK, camera detected.
Motion detection works only once, than stops.
If I change any parameter and do Apply, the first detection is saved (still images or videos) than nothing.
Other p…
-
![image](https://cloud.githubusercontent.com/assets/22832094/19378414/1bf1e8c2-91f5-11e6-94f7-868a4d5151fb.jpg)
Hello I have Raspberry Pi3, my settings: 1280x960 30fps, streaming also 30 fps 100% qual…
-
gyp verb get node dir no --target version specified, falling back to host node version: 8.16.2
gyp verb command install [ '8.16.2' ]
gyp verb install input version string "8.16.2"
gyp verb install …
-
We are unable to turn off the PWR LED by modifying `config.txt` as expected,
https://www.jeffgeerling.com/blogs/jeff-geerling/controlling-pwr-act-leds-raspberry-pi
Green ACT LED can be deactivat…
-
Upon running `npm install -g noble` I get below error:
```
make: *** [binding.target.mk:109: Release/obj.target/binding/src/BluetoothHciSocket.o] Error 1
make: Leaving directory '/usr/local/lib/n…