-
I'm working on a project that uses a 3 axis CNC machine at its core which I would like to control with grbl. There are other functions that are performed before and after the core functionality which…
-
Seems like something is off on the high rez delta now.
400 steps/turn + 16 microsteps on 415mm long travel gives homing that gives up half way.
It also goes on to slow home too soon. When it does not …
-
@pfefferle You were working on this in Webmentions for Comments. Since Webmention now includes several templates, I want to see about merging in this code, but using the query variable comment over re…
-
I have finished building your project and it works correctly, the problem I have is that the touch screen does not work, I use a Chinese display with reference KMRTM28028-SPI, (ILI9341), I cannot find…
-
The RA8875 uses incompatible SPI mode and the current ESP8266 development it's in early stage, it simply has too much issues but I'm still try to get something work, actually the p8 release has a lot …
-
Hello Jpiat !
Firstly, thank you a lot for this tutorial and the code.
I've built your system with two Arduino UNO. I've managed to transmit something. However, on the receiver serial monitor, the…
-
Responsive images add the 'srcset' attribute to the 'img' tag which can then provide a variety of image resolutions, both in density and pixel size.
Should u-* on an img tag pay attention to the sr…
-
We hit an example recently where u-url was wrong: https://www.oh.mg/2024/02/crossing-the-street-and-getting-hit-by-a-car/ and https://www.oh.mg/2024/02/farscape-and-capitalism/ both have incorrect u-u…
-
Updates to Raspberry Pi OS bookworm (Debian 12) are disabling sysfs access to gpio,
After an apt-get upgrade, direwolf will not run if using gpio,
Dire Wolf version 1.7 KM6LYW-4
Includes option…
-
Hi
I have the following display.
![grafik](https://user-images.githubuserconte…