-
In order to be able to send the device tree validation results to the backend API, they need to be stored in a structured format and follow the expected schema. Essentially, this means a JSON file wi…
-
Hello,
The suggested warmup time for the PMS1000-7000 is 30 seconds as documented here:
[https://www.aqmd.gov/docs/default-source/aq-spec/resources-page/plantower-pms5003-manual_v2-3.pdf](url)
Has …
-
I was using this to log output from an AriBeam2 to a raspberry pi but since they changed their firmware to 3.7.19 it doesn't work anymore. Any suggestions?
-
Can you provide a definitive GPIOS list for Template since there are still some missing in the console command.
-
Could you use the reset and power safe mode pins, so it turn off the fan as well?
According to Plantower doc:
PIN3 is SET (3.3V logic)
SET=1 module is in the working state, and the module is electr…
-
http://aqicn.org/sensor/pms5003-7003/de/ seems to support 10, 2.5 and 1.0 .
In plus it's not only smaller, but promises as PMS7003 higher MTBF due to optimized airflow avoiding dusting.
![grafik…
-
Hi,
I want use a Dustsensor PMS5003 or PMS7003 in ESPEasy.
Is support planned for this?
Greetings Peter
-
I tried to use PMS3003. I get Attmpt to index Global "M" a null value. Is there any values to be added in the lua code?
-
## General Info
- **Sensor type**: Laser w/ Fan
- **Interface**: Serial
- **Power Supply**: +5V
## Documentation
- **Datasheet**: [Chinese](http://aqicn.org/air/view/sensor/spec/pms5003.pdf)…