-
I use the Pluto SDR to generate DATV (Digital amateur tv) and found a limitation in the maximum sample rate I could use.
My setup is OBS -> FFmpeg -> GNURadio version 3.9.2.0-0 > Pluto
I used a s…
-
Thank you for update, not sure if this is just an issue specific to me or not. Thought I'd share and provide some feedback.
Hardware:
PlutoSDR with firmware v33
Steps to reproduce:
Installed…
-
#### Expected Behavior
If I send the same messages with exactly the same settings once in the generation mode and once in the simulation mode, the result should be the same.
##### Settings:
![se…
-
It was recently reported that libiio was causing libhackrf not to discover hackrf devices (which not on purpose, and needs to get fixed).
Original issue:
https://github.com/pothosware/PothosSDR/is…
rgetz updated
2 years ago
-
Hey, everyone,
thanks to everyone who made this great piece of hardware possible :-)
Unfortunately I run into very strange issue: When I plug in the USB-cable, there is just the green LED going…
-
Please add python 3.9.x support
Python 3.9 was released 2020-10-05
-
Right up front, I'm not using the Raspberry Pi image mentioned in the instructions. I assume that's the issue preventing me from building this project successfully when running make gps_sim_gui_arm. I…
-
Hi,
I couldn't get the extended range to work in FW 0.32 using the
# fw_setenv attr_name compatible
# fw_setenv attr_val ad9364
https://wiki.analog.com/university/tools/pluto/users/cu…
-
OS Version: KDE Flatpak runtime
FW Version:
SW Version: e02cebe
Description of the bug:
Steps to reproduce:
- I followed the install routine here https://wiki.analog.com/university/tools/m2k/s…
-
Hey,
My HackRF One came in the other day, got it hooked up this evening with everything configured with what i believe is correct.
Gave it a good spin on my windows machine with SDR#, didn't n…