-
Hi just install from source in the jetson nano but the command :
SoapySDRUtil--probe="driver=plutosdr,hostname=192.168.2.1"
give me this error but the pluto is connected and detected with the i…
-
Hello, I just installed Photosware PothosSDR-2021.05.01-vc16-x64 on my Windows 10 machine, to use with my PlutoSDR. I removed the other device DLLs from the modules.08 directory, and I see what I want…
-
See post: https://ez.analog.com/adieducation/university-program/f/q-a/539472/plutosdr-v0-32-iio_reg-can-t-read-registers
I can repeat this on v0.32 firmware.
-Travis
-
Submodules u-boot-xlnx, buildroot and linux currently refer to commits which are not tagged or branch HEAD.
This makes impossible for git submodule to do a shallow clone, which greatly increases do…
-
hello ,The errors I encountered in compiling:Incorrect selection of kernel headers: expected 4.14.x, got 4.9.x.
I configured the environment variables according to the information in readme.What went…
-
> make -C buildroot TOOLCHAIN_EXTERNAL_INSTALL_DIR= ARCH=arm CROSS_COMPILE=arm-xilinx-linux-gnueabi- BUSYBOX_CONFIG_FILE=/home/michael/devel/pluto/plutosdr-fw/buildroot/board/pluto/busybox-1.25.0.conf…
-
Hi,
I couldn't get the extended range to work in FW 0.32 using the
# fw_setenv attr_name compatible
# fw_setenv attr_val ad9364
https://wiki.analog.com/university/tools/pluto/users/cu…
-
make -C buildroot TOOLCHAIN_EXTERNAL_INSTALL_DIR= ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- BUSYBOX_CONFIG_FILE=/buildroot/board/pluto/busybox-1.25.0.config all
ERROR INFO:
relocation R_X86_64_…
-
Hi,
as others have pointed out, there are problems with plutosdr fw 0.32 and SDRAngel. I seem to have found the cause of the problem.
Example: I'm injecting a 433.0 MHz sine into the RX port of …
-
I have recently installed sdrangel 4.14.20 on windows and compiled from source on linux the same version.
I also updated the f/w to 0.32. Flashing takes pretty long compared to 0.31 (as in, maybe 4x …