-
I want to detect a power outage to know when we have to turn of unnecessary devices, before the battery gets to low/empty. As far as I can tell the best option would be to use "Operating status" (id: …
-
Hello, first and foremost thanks for this GREAT project, both the hardware and the software are fantastic!
It seems that there is an issue in the divert control system, where the current setpoint k…
-
**Describe the bug**
For fossil_fuel_percentage the secondary_info does not show the result from template.
This worked fine in v0.1.8.1. After updating to v0.2.2 this is not longer the case.
Instea…
-
**Bug描述**
使用家人账号添加后在“添加已绑定的缴费号”出现错误，使用我自己的账号绑定后可成功添加。
两个账号最大的区别应该是存在一个工商政企的用电绑定。
![屏幕截图 2024-03-29 091101](https://github.com/CubicPill/china_southern_power_grid_stat/assets/35249391/1445d28e-5744-…
-
I am trying to make a dumb wallbox a little bit smarter. Therefore I need to switch the target soc state depending on time of day. During the day the car can get 80% SOC by solar power, during night t…
-
Marko and I had a discussion about power routing, and I think it would be a good idea to include the geometry of IP-level power grids in hammerIR to facilitate better chip-level power planning.
Pre…
-
Hi @britkat1980 Using Dev 3.0.32
First issue is here -
```
2024-10-21 19:41:26,798 - read - [INFO] - Starting watch_plant loop...
2024-10-21 19:41:26,815 - read - [CRITICAL] - Detecting inver…
-
Please add support for Huawei inverters.
I use https://github.com/wlcrs/huawei_solar.
This integration exposes the information and functions made available by Huawei Solar inverters directly via …
-
There are a bunch of template sensors providing a layer of indirection for the "meter active power" sensors apparently intended to cover the case where the "raw" sensors report 0x7FFFFFFF (when grid p…
-
Currently, evcc tries to adjust grid consumption for the LPC use case. Regulation seems to require tuning down new SteuVEs, but not a) all chargers and b) not tune down grid consumption but consumptio…
andig updated
1 month ago