-
https://community.frame.work/t/turn-off-power-led/11967/3
Related to [Benjamin-Loison/cinnamon/issues/67#issuecomment-2146256288](https://github.com/Benjamin-Loison/cinnamon/issues/67#issuecomment-…
-
Hey!
Nice work on all the firmware man! I really enjoy using them. I just can't get GPS to work with betaflight right now. I tried in the CLI and it just says unavailable.
I think the potential sol…
-
I built my own openwrt and ajusted mraa to work with pwm. I can dimm a LED. But the command `logread` says `local1.err libmraa[2056]: pwm0 write_period: Failed to write to period: Invalid argument`
I…
-
how to increase the rplidar S2 publishing frequency upto 15Hz?
Rplidar current publish frequency is only 10Hz. However the publishing frequency of rplidar A2 is 13 to 15 Hz.
-
I have following items
Arduno UNO board
3.5W Laser module
CNC shield Ver 3.0
2 stepper motor drivers
2 limit switches
400W power supply
And the laser module have only 3 wire output, one 12V+, G…
-
I'm using a BLHeli32 motor controller with a PID loop, and recently switched between PWM input (Motor direction: bidirectional soft), and dshot600 (sending command ID 10 to enable bidirectional input …
-
### Describe the bug
Having successfully enabled the Compute Module 4 IO Board embedded fan controller and RTC from config.txt using the following lines:
```
dtparam=i2c_arm=on
dtoverlay=i2c-rtc…
-
Hello,
I would like to suggest adding a way to control servo motors with this library.
Usually, with an Arduino, one would simply use the "Servo.h" library to control a servo motor. However, whe…
-
Purchased RealFlight 7.5 just to get the Interlink controller to do functional testing of Arducopter. Currently it works as a Joystick, and the analog inputs for Ch1-4, and the Ch6 knob work as expec…
-
ESC: HK-Mystery 20A
Interface: UART
Issue: Motor gives single beep. ESC does not react on UART commands.
bs_nfet.inc:
.equ F_CPU = 16000000
.equ USE_INT0 = 0
.equ USE_I2C = 0 …