-
While typical deep-sleep current of L01 is around 5uA, if machine.deepsleep() is called after i2c.init() followed by i2c.deinit(), the deep-sleep current is much higher - more that 30uA.
I found a …
-
The board runs for anywhere from a few minutes to a few hours before the issue occurs.
If the watchdog was effective I could live with the crash, but for whatever reason the WDOG does not fire, so th…
-
https://forum.pycom.io/topic/908/umqtt-aws-iot may be useful
-
Pycom board: gpy with pytrack 2.0
Firmware version: release='1.20.2.r4' version='v1.11-ffb0e1c on 2021-01-12'
Exact steps to cause this issue:
Create python program with one thread blinking the…
-
I procured the Pycom Expansion Board 3.1 and the Lopy4 to function as a Lora module recently.
First while trying to update the Expansion Board 3.1 firmware, did the following:
- Connected the Expa…
-
In case a server transports VT_I1 SAFEARRAYs to the client a wrong interpretation to VT_UI1 is done in Python. Hence the client retrieves wrong data, i.e. -128 is transformed to +128.
The attached p…
ghost updated
3 months ago
-
``` Version via REPL: (sysname='LoPy4', nodename='LoPy4', release='1.20.1.r2', version='v1.11-06dfad0 on 2019-11-30', machine='LoPy4 with ESP32', lorawan='1.0.2', sigfox='1.0.1', pybytes='1.3.0')```
…
-
Using LoPy4
release=1.20.2.rc3, version=v1.11-2037465
I have following code:
```
import time
import pycom
from network import Bluetooth
bluetooth = Bluetooth()
bluetooth.set_advertisemen…
-
Recently, I had to upgrade the FiPy v1.2 with custom (unofficial) firmware build 1.20.1.1r using _pycom_firmware_update_1.16.1.exe_
`Pycom MicroPython 1.20.1.r1 [15b6d69] on 2019-11-02; FiPy with ESP…
-
Hello,
How to change the CPU Frequency from 160MHz to 240MHz, I changed the sdkconfig.h but no change.
Thinks.