-
Hi,
I have the RAK831 Gateway and I want to use it with my custom code and backend server, can this software be used in any way to do this?
Thanks
-
Hi,
1st of all, thanks for the great work you've done (and are still doing), the main function, working as a TTN Lorawan gateway, is working perfectly. I have the Pi0W + RAK831 board, PCB version 1.3…
-
I tried reseting my gateway iC880a-SPI using command **$ sudo ./reset_lgw.sh start** and left the code running for 1 minute.
how does the actual process starts as soon as the gateway is on:
1. RS Pi…
-
Get "CRC error, damaged packet",when run ./test_loragw_rx 435.425 410.425,only 2% packets are received correctly,who known why?
wx-ta updated
5 years ago
-
I have been testing the robustness of the Murata module by using B-L072Z-LRWAN1 with this core, version 0.0.7 and have encountered an issue where about a day later the transmissions to gateway stop. T…
-
Hi Charles
I used your board (the one you gave me in Amsterdam which was pre-soldered) to build a Gateway, but it does not work (the concentrator cnaoot be connected, the rest works ok). When I check…
-
Hello ,
During my range testing of LoRa I have found out that after reaching a certain level of RSSI it doesn't join. When my RSSI goes below -110 the node is not able to join the lorawan-server. I…
-
I am using the network IN865. I have set tx_power=20 and I have already joined on a node on a gateway (say gateway A). When I am trying to connect it with other gateway with same parameters it is givi…
-
Hi, I want to use KR channel plan related gateway conf file like below.
https://github.com/TheThingsNetwork/gateway-conf/blob/26cfea86d967dfe6cd4b319e8318d64eb4469900/KR-global_conf.json
it does…
-
I'm using RAK831+WisAp. After building openwrt and burning it to device, every packet_forwarder's launch is finished with "ERROR: failed to start the concentrator". I've checked it by test_loragw_spi …