-
Hello! One user of my 8266 port has FTXB50 , and it appeared not to work. At all. Faikin can't recognize the protocol.
We did some research. First of all, i have a spare russian Daichi controller (…
-
## Device
- Product name: Moes thermostat BHT-002
- Manufacturer: _TZE200_aoclfnxz
- Model identifier: TS0601
- Device type :
- Thermostat
## Screenshots
deconz version 2.05.81
…
-
### The problem
After upgrading to 2022.5 the generic thermostat now divides the true value by 5 e.g. 20 degrees C now shows as 4 degrees C.
### What version of Home Assistant Core has the issue?
2…
-
Available here :
https://github.com/airy10/pvvx_mithermometer
Mainly a copy of the esphome atc_mithermometer component with updated decoding code
-
### PROBLEM DESCRIPTION
I have 3 PZEM-004t v3 connected to NodeMcu .
Sometimes the voltage is down to 0 for 1 second ( it can be 1 pzem or 3 of them) and the Energy is jumping to enormous value,…
-
Hi,
thank you for your great work! I've activated ebusd on my system, an Elco Aerotop Split 11rx ( No hybrid ).
I can see a lot of parameter but some are not showing.
Particularly i want to rea…
-
Please provide your feedback to the Z-Stack_3.x.0 coordinator 20230507 firmware here.
I hope this solves the `NWK_TABLE_FULL` many people were experiencing.
**Changelog**
> # 20230507
> - En…
-
### What happened?
I have a setup with several Popp-TRVs (identical to Danfoss Ally TRVs), lots of Aqara sensors and two routers, all connected to a Sonoff USB Dongle 3.0 Plus. I run Home Assistant a…
-
**Have you look for this feature in other issues and in the wiki?**
=> YES
**Is your feature request related to a problem? Please describe.**
=> I have a few power measurement devices (Blitzwol…
-
### The problem
I’ve paired a couple of Develco Frient devices with ZHA, and while they mostly work, the experience is not great.
In general, the devices seem to work a bit buggy compared to the…