-
No LEDs after flashing Pwnagotchi image onto SD card
I have assembled the hardware of my Pwnagotchi. I'm using a Raspberry Pi Zero 2 W with a WaveShare v2 screen. I have flashed the Pwnagotchi zi…
-
While running object detection example for Hailo (`examples/hailo/detect.py`) with the image of an orange, it detects it somewhat poorly, detecting only a vase sometimes:
![20241030_19h56m55s_grim]…
-
Hi,
for boat owners and OpenCPN users this project is a great find.
Marcel are you still supporting this project?
If yes: I have an issue with first run of the 'vwi_waypoints_generator.py' scrip…
-
#### Overview of the Issue
Is the Zero 2 W supported? I have tried the premade image for the pi3 but the zero 2 won't boot with it. I have tried Pi OS Lite 64bit Bookworm and Bullseye. They both han…
-
Plain install from Raspberry Pi Imager. (Both nightly builds, 2024-03-07, 2024-03-31 and the stable version 2022 are broken
tested on Raspberry Pi 4 and Raspberry Pi Zero 2W
#### Stable version (…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What happened?
## Description
```shell
[root@localhost ~]# buildah pull --policy=always --platform=linux/arm…
-
im trying to use an 0.96inch oled 128x64 i2c display but i get the error
`unsupported` display type sh1106_i2c
`
i used the instructions from [this](https://www.reddit.com/r/pwnagotchi/comments/…
-
hi, i am very new to VLC for Flaschen-Taschen.
i am using VLC 3.0.21 that is shipped with Raspberry Pi OS (bookworm) 64bit.
i have the ft-server running for a 256x128 LED-Matrix (two chains with 4x …
-
### Description of the issue
I just updated my HA OS running on a Raspberry Pi to 13.2 and the Zigbee2MQTT Add-On just stopped working. The container just doesn't start anymore. No error logs (Neithe…
-
I have a 2K monitor with native **2560x1440** resolution. Using _Raspberry PI 4 model B 2GB_ , _Buster 32bit LITE_.
The problem is **rpisurv** can't display a solo/single rtsp stream in a 2688x1512…