-
### What happened?
Hi,
I would like to create a simultaneous multi-slice (SMS) example for a course.
First, I created with pypulseq a standard Multi-slice GRE sequence with long TR=1000ms in or…
-
Updated the application 2.02, now I can not record the RF signal (
Only I have a problem?
-
I'm seeing inconsistent operation of the transmitter in which no audio is present, even though the RF drive is present. I confirmed this by looking at the RF signal at the gate of the MOSFET in AM mo…
w9ran updated
3 months ago
-
It recognises some signals (weather station and rf plugs) but i can't see anything in home assistant
-
Hi,
I am using the SRX882 receiver together with a raspberry pi 4. The CS pin is connected to vcc.
I have three different remote controls to turn on/off three sets of remote sockets. All three opera…
-
### Actual Behavior
In our case, when we build a GOlang based app inside a linux/amd64 Docker container, and compile it for the amd64 architecture, we get regular segfaults. It doesn't happen on ev…
-
Hello,
I'm trying to decode my awnings RF codes, I'm using a Wemos D1 and a RXB6 receiver and I have this PINs config:
```
#ifdef ESP8266
// ESP8266 D1 Mini
#define PIN_RF_RX_PMOS_0 NOT_A_PIN /…
-
- [x] Fix gateware
- [x] Fix driver
- [x] Fix software part
- [x] SoapySDR (fix, GNU Radio detection test) (6h)
- [x] DMA loopback with GNU Radio (2h)
- [x] SDR loopback with GNU Radio with low s…
-
### Current Situation
I picked up a few of these boards and I am hoping I can get this project loaded up on them? Unfortunately I'm having a hard time picking the right board/platform (I think?)
h…
-
```
22:59:56 [V] [rxLoop:167] Have 45 bytes from CC1101 Rx, RSSI: -94 dBm LQI: 129
22:59:56 [D] [mbus:034] Processing T1 A frame
22:59:56 [V] [mbus:045] Frame: 36571C2D6734393C71B6638D96C58D5AC3B19…