-
Hi Vitali,
excellent work again with this library, thanks a lot for sharing.
I got the four led panel for 64x64, I was layout it for 128x128(Row : 64, Col : 255).
I got the flicker for the test r…
-
I have the following error:
FYI: not running as root which means we can't properly control timing unless this is a real-time kernel. Expect color degradation. Consider running as root with sudo.
How …
-
I am using a raspberry pi 4 with six 32x16 outdoor p10 matrix panels. They are being used as part of a sports scoreboard (cricket).
To interface with the board, I am trying to build a very simple R…
-
Hi i have no pin R2 B2 G2 E is GND GND is NC
I wanted to do this project
https://www.instructables.com/RGB-LED-Matrix-With-an-ESP8266/
[``](![PXL_20241012_083927300](https://github.com/user-attachm…
-
Hello Everyone!
I am at the very last step to finish my little hobby project.
I am uploading a picture to my flask /upload function from image.html:
```
LED Matrix Display
…
-
I haven't been able to get the led board to light up on initial install, following the documentation provided.
I first tried adding NFL to the same pi as my working MLB, then once I installed the …
-
I'm not in a great position to submit a pull request at the moment (I've made a lot of poorly managed changes during experimentation), but I thought I'd pass this along in case someone wants to integr…
-
Hello,
First off I want to thank you for this lovely library and the great explanation on wiring up a panel to a Raspberry Pi!
I'm running into an issue with the Node binding over at https://gi…
-
I'm fairly new to the pi 4, adafruit hat, and have only done some html5+js+css programming. i'm trying to make a large 3x4 matrix of 32x64 panels to display a huge finish line stopwatch for a kids ru…
-
So I connected a 64x32 matrix to my raspberry pi 3 b+, ran the sample files but it is acting weird.
I got 2 panels and I tested both and it does the same with both, so I assume is not a hardware prob…