-
2024-02-15 12:35:01,419 INFO:Scanner (RTLSDR 00000102) - Scanning only frequencies (MHz): [401.4 404.6 405.3]
2024-02-15 12:35:13,677 INFO:Task Manager - Detected new RS41 sonde on 401.400 MHz!
2024-0…
-
If the software detects a probe, the decoder remains attached to this probe.
But as there are many probes in the air it would be good if the decoder could jump to the next probe after a few seconds.
-
Could you provide a flashable release file so installing MDK and friends won't be necessary?
-
I am trying to receive a RS41 sonde in 403.000 MHz (from Madrid, Spain)
I have attached the same antenna I am using, with an RTL-SDR and check that I am receiving it.
Also, when I look in the spec…
-
Configured all values in U.Info, set both MSG and GPS channels and radio is sending the APRS frames which are decoded correctly by direwolf :+1:
Minor stuff that could be fixed:
- MySSID and Di…
sq2mo updated
7 months ago
-
```
RuntimeError: false INTERNAL ASSERT FAILED at "/opt/pytorch/nvfuser/csrc/executor.cpp":404, please report a bug with repro script to NVFuser at https://github.com/NVIDIA/Fuser/issues. Allocations…
-
@srcejon
Hey! I am tracking RS41 and want to have full flight log in CSV file, but cant find a way to get altitude to be written into csv log file.
Could you explain how i can make it work? Or, if…
-
**Home Assistant release with the issue:**
0.95.4
**Last working Home Assistant release (if known):**
New component, wasn't present in previous releases
**Operating environment (Hass.i…
-
The address fields and the routing fields in the packet header are transmitted in a mixed order.
Expect:
[sender callsign]>[to callsign],[WIDE1-1],[WIDE2-2],:
TRANSMITTED ORDER:
[WIDE2]>[WIDE1-1…
-
Hi!
For the past 4 days I have been trying my best at decoding the (supposedly) MRZ-N1 sondes that have been passing above me lately, with no luck. Even though the signal is definitely strong enoug…