-
Hi,
When I want to start printing with USB mode, nothing happend on the printer because cura doesn't send any temperature order for the extruder (0°C.
A temperature (205°C) is set for this material …
-
步骤:
1. 安装好driver
![image](https://github.com/MooreThreads/torch_musa/assets/140575538/2d70ca57-17a2-43c9-a72a-b7816d026af1)
2. sudo docker pull registry.mthreads.com/mcconline/musa-pytorch-dev-publ…
-
1. The Samsung dedicated UFS card was confirmed to work on both windows11/Manjaro with seq read around 372MB/s and seq write around 202MB/s. And the uSD card works as well.
![UJ6HK$SR@VG25H_ @L%E3HI]…
-
Берём ячейку со значением, внутри которого разные шрифты, надстрочные и подстрочные индексы, типа
```
L
0
– долгота осевого меридиана шестиградусной зоны [градусы]; …
-
### Is your feature request related to a problem? Please describe.
I need a whistle after warm-up, but the marlin doesn't have that option.
### Are you looking for hardware support?
ramps 1.4
### …
-
### Did you test the latest `bugfix-2.1.x` code?
Not yet.
### Bug Description
The heater does not heat when setting nozzle temp via LCD nor via terminal "M104 S80". I get thermal runaway faul…
-
### Application Version
5.2.2
### Platform
WIndows 10
### Printer
Artillery X2
### Reproduction steps
I have been going crazy trying to work out why my prints abort some way through. Turns out …
-
I’m using frames/vinyl with ghc8.6.3 and seeing very large compile times (minutes) and memory use (> 20GB). This is on a relatively powerful Mac Laptop. The memory is the issue, the laptop has only 16…
-
XCSoar versions having and not having the problem
-------------------------------------------------
Current version 7.35, run on Pixel 4a. Tested on 2 pcs Nano3 and one Nano4 loggers
Expected…
-
I write this request because I use duet side filament configurations.
That includes:
+ Temperature settings for idle and active state
+ hardware retraction
+ Plus it would be awsome to limit the…