-
### Describe the bug
I have intermittent system crashes with the following setup:
* Raspberry Pi 4B, rev 1.1, 4 GB RAM
* USB case: Axagon EE25-XA6 (ASMedia ASM225CM, enabled UASP and TRIM, USB 3.…
-
I've attempted to connect a PLM via serial cable. If I attempt to start the bridge without having configured even a dummy device, the bridge will not start. Errors with the following:
```Insteon Br…
-
I set up a micro-ROS system on an ESP32 to publish three messages simultaneously in a single timer callback with a 20 ms interval.
tf2_msgs__msg__TFMessage
sensor_msgs__msg__JointState
nav_msgs_…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Run `sudo envycontrol -s nvidia`
2. Reboot
3. sddm fails to start,…
-
Hello!
When I use /dev/serial/ symlinks for usb serial device in textual .things config file the OH restarting endless.
Example of using
Bridge modbus:serial:Relay [ port="/dev/serial/by-id/…
-
I have a HEM-7600T but I am not able to readout data with omblepy. I tried it under Ubuntu, ESP32 and Windows 10. Today, I once could readout data with UBPM under Windows but cannot reproduce it anymo…
-
If the buffer_length is smaller than the actual content of "key" then the Bridge.get() command takes about >5200 ms (yes, more than 5 seconds ...).
Tested with the following code:
```
#include …
-
### Describe the issue you are experiencing
Hello! I was trying to install HaOS on an HP 15-dw3023nia using a live Linux USB drive. The image flashed successfully, but there was no boot - it got stuc…
-
root@nas2:~# smartctl -a /dev/sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-25-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: U…
-
**Describe the bug**
Whenever an external screen is attached, the system "hangs" (loops displaying exception on the main console).
**FreeBSD version**
FreeBSD t590 13.1-STABLE FreeBSD 13.1-STABLE…
mkzol updated
5 months ago