-
### The problem
The "early_pin_init: false" does not work with light component.
In this case the relay toggles "off" for a short time at boot (when relay was "on" at boot):
```
esp8266:
…
-
After about a week the Matterbridge lost connection to HomeKit.
Restart does not help for all Shellies.
Update via Frontend, still not working (Ubuntu single board installation)
Manual update giv…
-
## Is your feature request related to a problem? Please describe.
The new Shelly minis are out for a while and work really nicely given their very small size and modern chips.
- Shelly Plus…
-
### What happened
moonraker failes authenication with shelly plug plus s.
https://www.shelly.com/en/products/shop/shelly-plus-plug-s
This results in the following log:
```
2023-12-17 21:14:0…
-
I would like to be able to flash the i4. I'm not certain what mongoose firmware it uses. How can I find out?
-
Hello experts,
first of all many thanks that the firmware development is ongoing!!
Even with the new firmware I have the problem, that the shelly rgbw2 devices (using rgb+w mode, bridge + rgb + wh…
-
I have connected a reed contact as external switch to a Shelly 1 Addon as sensor for position of a garage door. The external switch is reflected in the JSON output, but not in OH3
Full JSON Output …
-
Following the `README` unfortunately bricked 2 of my shellys.
Steps to reproduce:
* Connect to shelly, provide wifi-credentials, continue with ip in the lan with internet access
* upgraded vanil…
-
### I'm sure that
- [X] This issue is still present in the **current beta version** of this adapter
- [X] There is no other (open) issue with the same topic (use the search!)
- [X] This issue is not …
-
I've set up a protocol for **[Shelly EM](https://www.shelly.com/en/products/shop/shelly-em-120a)**, and it seems to work fine. I attach it.
From the admin page I have the "IP or RS-485" and "Port" …