-
**Update:** @vertigo235 set up a Discord server for this issue, if you'd like to discuss/work with people on the problem. Here's the link: https://discord.gg/hYUjSnW
This issue has been closed afte…
-
Hello I try to compile the firmware in MCUXpresso IDE. But I getting error in build. If I comment the #define TRINAMIC_ENABLE 2209 the build is ok.
Error:
```
../src/tmc_uart.c: In function 'if…
-
After this [spi_flash: reduce speed to 400K](https://github.com/Klipper3d/klipper/commit/dc28257a7547d282543d011dbe1e9b513a32a8ae) update I can no longer flash the firmware via SPI.
The error m…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
M218 is not working as expected, a Z offset of 2 is almost the offset I need, I get the nozzle close…
-
### Bug Description
Using Marlin 1.1.9-bugfix on an Ender 3 Pro with Creality 1.1.5 board.
Created GCODE for calibrating Linear Advance 1.5 using http://marlinfw.org/tools/lin_advance/k-factor.htm…
-
-
Probing a mesh or Screws_Tilt_Calculate are no longer accurate. Several others are having this issue. With no mesh I can print a 150x150 first layer test perfectly, but screw tilt says I need to make …
-
I just downloaded and trying to compile grblHAL with LPCXpresso
I have my_machine.h
#define BOARD_BTT_SKR_14_TURBO
I have Build Configurations BL_0x4000
I'm getting "make: *** [src/flash.o] Err…
-
I recently upgraded my hot end to a E3D-V6. Once I put it on and updated klipper and mainsail to the newest version both my hot end and bed quit sending accurate temperatures. Both are reading around …
-
Hi
With the latest firmware I can't get Y and Z axis to move on skr 1.3 and 1.4 turbo while X axis works smoothly, I haven't changed anything in config.h, where am I wrong?