-
hi,
I am trying the provided tests but failed to reproduce reliable test results.
the setup:
* arduino nano as master
* attiny85 as slave
* both are on a breadboard
* the 5V power is provi…
-
I am trying to implement SMBus logic with the I2C driver for a PIC32MZ2048EFM100.
My application uses the above mention PIC MCU but this feature request is probably mostly the same for other MCUs in…
-
The i2c_smbus_write functions seem to not exist on my system.
```
gcc -Wall -fPIC -Ofast -mfpu=vfp -mfloat-abi=hard -march=armv6zk -mtune=arm1176jzf-s -c bcm2835.c
bcm2835.c: In function ‘bcm283…
-
```
# sensors -u
iwlwifi-virtual-0
Adapter: Virtual device
temp1:
ERROR: Can't get value of subfeature temp1_input: Can't read
k10temp-pci-00c3
Adapter: PCI adapter
Tdie:
temp1_input: 72.…
NTMan updated
3 weeks ago
-
the smbus installation worked, I was able to test the i2c and that works. I also got no errors when installing through pip install. However as soon as I try to run a script in Python3, it says that:
…
-
hello, I'm using for the first time Jeston TX1, and I wanted to run the MIT racecar as your tutorial describe, but unfortunately I have this error " error: ‘i2c_smbus_write_byte_data’ was not declared…
-
sudo apt-get update
sudo apt-get install i2c-tools
Also, the readme is missing a further command inside the ~/RPiFEBP/ directory:
sudo pip3 install smbus
-
For the life of me I can't seem to get this thing to install on Kernel 6.8.12 with an 155H processor. Can somebody confirm whether its supposed to be supported at this juncture.
I haven't been abl…
-
### Describe the bug
I have the iCUE H170i ELITE CAPELLIX XT
Every time I do a command like `liquidctl set fans speed 70` the RGB of the pump and the 3 fans "flickers" - it goes off for about half…
-
### Describe the bug
OpenWrt stops while booting.
official image 23.05.0-rc3 and self-built image have the same bug.
### OpenWrt version
r23389-5deed175a5
### OpenWrt target/subtarget
x86/…