-
Hi, I am working on a small project depending on Arduino, max 232, and solar inverter.
I do the wiring and upload the code, the problem is I have two brands of solar inverters, one of them a commerc…
-
Below is the code for the my app.yaml and automations used to integrate my Sunsynk 8.8Kw ECCO inverter, hopefully it helps others. Thanks to @springfall2008 for the code modifications along the way.
…
-
### Describe the issue
I had an installation of Huawei Solar in the past. It was deleted, because I found other solutions to get the informations and there were issues with having multiple modbus con…
-
```
This is more a request than an issue.
would it be possible to run this on a snake?
http://code.google.com/p/sma-bluetooth/
I'm not experienced with linux or programming but
would like to know …
-
Now that the OSS project is dead, it would be nice to put back in to this at least the JK CAN protocol(s) that the new bms boards support so that we could connect this wired, and then output CAN to in…
-
### The problem
I got an unexpected error
![grafik](https://github.com/user-attachments/assets/38037592-ed77-494c-8291-3913427b3a64)
while trying to connect to my Kostal Plenticore 10 G2
### …
-
Interface from homeassistant:
- Latitude
- Longitude
- Declination (0 = Horizontal, 90 = Vertical)
- Azimuth (360 degrees, 0 = North, 90 = East, 180 = South, 270 = West)
- Total Watt peak power o…
-
Hi @syssi,
Not sure if it was already implemented but seems there is a new variant of the protocol :
[Axpert_KSMKSV_RS232_Protocol-C20170821.pdf](https://github.com/user-attachments/files/1552113…
-
Hi everyone!
I'm trying to connect my On-Grid Solar PV system composed by:
Deye Grid connected PV Inverter (SUN-3K_-G03)
logger with serial number 27XXXXXXXX and Firmware version LSW3_15_FFFF_1…
-
### Describe your feature request
As per the wall charger feature request, this 'issue' is intended as a location for people to be able to start gathering information and discussing how it works an…