-
I'm trying to program a Nucleo STM32L432KCU6.
I've verified the STLink v2.1 appears properly on OS X:
STM32 STLink:
Product ID: 0x374b
Vendor ID: 0x0483 (STMicroelectronics)
I've also up…
-
## Bug Report
When uploading to the Ladybug L432KC board with the arduino-cli, I sometimes get an error.
### Current behavior
This is the output from the cli:
```
arduino-cli upload -b gr…
-
**Describe the set-up**
* Custom board with STM32L431RCTx.
* CubeIDE 1.15.1, L4 drivers v 1.18.0
**Describe the bug**
Reading from an SdCard **hangs** with the following conditions:
**SDMMC_D…
-
I recently, started using u8g2 and this is definitely amazing library for working with monochrome LCDs.
I recently got LCD based on UC1608 chip set and I saw u8g2 had support for it. But my lcd wa…
-
![dragonfly_layout](https://cloud.githubusercontent.com/assets/6698410/14963841/6db55ce2-105a-11e6-9711-bdbb2d299491.jpg)
-
I found this ADC with DMA example and did mods to get it working on current sources and running on LadyBug.
[adcdma.ino.txt](https://github.com/manitou48/STM32L4/files/837434/adcdma.ino.txt)
The o…
-
It would be very helpful if the Dir class (in FS.h) has a method that tells you if the current entry is a directory. It would make it much easier to do recursive file scans.
Suggested implementatio…
-
**Is your feature request related to a problem? Please describe.**
We are using the supercapacitor instead of battery connected to the VBAT input and we need to charge this capacitor when the system …
-
If you run the ./tools/configure.sh script without a ../apps folder or without setting APPDIR you get errors like below without any helpful reason what is going on. It took several minutes to figure i…
-
on the spi header, it is impossible to trace which pin the CS pin is without looking at the schematic.
this can be a little problematic for newbies.