-
**Observed Issue**
When using RadioLib v6.4.0 or newer with stm32duino/Arduino_Core_STM32 2.7.1 (latest) on a STM32WLE5CC-based module, radio.begin(915.0, ...) fails with state -707.
Same exact …
-
### Description of defect
Using STM32WLE5C, I2C_3 is able to enter deep sleep, but I2C_1 and I2C_2 no.
#### Target(s) affected by this defect ?
STM32WL
#### Toolchain(s) (name and…
-
Are there any plans to replace the internal `PhyRxTx` and `Timings` traits with ones from a trait crate, similar to `embedded-hal` but for radios? There is a [radio-hal](https://github.com/rust-iot/ra…
-
I'm attempting to get this nice demo running on my NUCLEO-WL55JC1 boards. I've made the following change to the code to account for regulations here....
```
diff --git a/shared/src/lib.rs b/shared…
-
The RTC is a key component to getting accurate timestamps on the measurement. It is used as part of the LoRa firmware to schedule when function calls a preformed.
Outcome: Library that tracks the …
-
To reproduce:
`cd examples/stm32f0`
Change `stm32f091rc` to `stm32f072c8` (keep rest of `Cargo.toml` the same)
`cargo build`
The result is:
```
error[E0609]: no field `hsi48` on type `Temp…
-
For nrf52840 LoRa examples (using Spim TWISPI1), the probe-run method still results in correct SPI operation. For example:
- probe-run --chip nRF52840_xxAA target/thumbv7em-none-eabi/release/lora_…
-
### Version
5.6.0
### Description
Currently, as per
https://github.com/wolfSSL/wolfssl/blob/62a4329f8eadff2b2b3459c4677d9a80f4a7f150/wolfssl/wolfcrypt/settings.h#L1361-L1366
WolfSSL supports …
-
The STM32WL55 series combines an MCU with a LoRa-transceiver in a single module. I'm working together with STMicroelectronics to get some support for these chips in the Arduino ecosystem, and we're cu…
-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
latest pull
### Description
The firmware doesn't build: the `c_cpp_properties.json` generated file is corrupted with escape …