-
Can't write to stm8l151k4 due to block size. In family "stm8l151?4" is block size 128 bytes instead of 64 bytes, please check PM0054 page 26. It is in file stm8.c line 474 (e.g. 72be7ba).
-
In line 320: #define __TIM6:UPD_VECTOR__ 23
I think the ":" should be a "_". I found this while trying to get TIM4 to work - sadly without much success yet. I think the interrupt mapping might be…
-
Hi,
I am looking for a debug adapter to debug an esp32 which requires JTAG.
On aliexpress I found this adapter: https://es.aliexpress.com/item/ST-Link-st-link-V2-for-STM8S-STM8L-STM32-Cortex-M0-Co…
-
Basic Project ... I'm seeing these errors...
----------- Project STM8_Template - STM8 Cosmic - Configuration Debug -------------
Compiling ..\..\..\..\library\base\gpio.c...
cxstm8 +warn +modsl…
-
Node Id changing when directly read from EEPROM
Node0x0A>Node0x07>Node0x05>Node0x02>
Node0x00>
Node0x10>
Node0x0E>
Node0x0C>Node0x0A>
-
The use of delays inside the method is to ensure ACK package to be sent without returning to Standby-I mode immediately.
void RF24::stopListening(void)
{
ce(LOW);
delayMicroseconds(txRxDelay);
…
-
Hey guys
it may be a stupid question, but I built the software and seems able to run it, but my hex files return errors. I try to program an STM8L with the following command:
`./STM8_serial_flashe…
-
For the STM8L/STM8AL, RAM routines are already put in place by the bootloader, and need not be supplied by the host computer.
Philipp
-
Arduino IDE 1.6.5, NodeMCU 1.0 @80MHz, DHT22
I get many wdt reset for both DHT_example and DHT_esp8266. And readings will be available after the third acquire for DHT_example. Before this, all readin…