-
# Aplicação: Rádio
O responsável por esse issue deve:
- **Pesquisar sobre essa aplicação**
- Em qual contexto do projeto será utilizada?
- Qual geralmente é o propósito dessa aplicaçã…
-
I tried to get the older version of the 433mhz lora heltec working. The board name is heltec_wifi_lora_32. I seems not to detect anything. Do you have any idea what i could try?
```
[env:esp32_hel…
-
### Current Situation
WH2 is a temperature humidity sensor listed as OOK in fineoffset.c
Cannot hear it with Heltec .. any way you can help me?
### Logs
```markdown
no logs
```
### …
-
Hi
I'm testing with the example code.
The gateway could receive from end-device and showed that sent the Ack.
But end-device have not receive any data from gateway and wait until time out.
I check…
-
Hi,
Last week I did some test with sending POCSAG messages using sx1278 (LoRa)-radio chip on Lilygo TTGO T-beam.
https://github.com/on1arf/sx1278experiments/blob/main/sendpocsag.py
As this devi…
-
I'm using Dragino LoRa / GPS HAT which includes sx1276/8.
I installed and loaded the device driver according to the manual posted by the author.
But the LoRa module does not work properly.
Ar…
-
Hello,
i use the ESP32Cam as Transmitter an an ESP32 Wrover as Receiver to transmit a picture from the examples, which works fine.
I read the Battery Voltage on Pin 14 of the ESP32cam and tried …
-
Hello everyone! Yesterday I had cloned the repo, followed the instructions on the README and created 2 esp32 projects on my PC: one for the sender and another for the receiver. But it seems that the s…
-
I wrote a small app in order to test the range of the TTGO ESP32/SX1278/SSD1306 boards. The transmit side is straightforward and sends packets with the string "Block" followed by a number that increme…
-
Hello,
I have some questions to this repository. I hope you can help me.
I want to build, debug and flash this firmware for Lora STM8L MCUs on a HIMO 01M microcontroller with a MCU (STM8L051F3…