-
I have a custom T962A-Upgrade-Board https://github.com/rharrison/T962A-UpgradeBoard.
One of four MAX31850 thermocouple amplifiers is not working properly.
When i connect the board to an arduino all …
-
Getting easy access to this data might help maintaining the device properly, in particular if people end up sharing their experiences, e.g. how much does a fan need to be used until it fails. Example …
eras updated
2 months ago
-
I had a question to which pins can I connect my ad8495 thermocouple
-
Hello.
Help understand where to look for a malfunction.
I tested the oven for an hour. Then he waited until it cools down. Pulled out a thermocouple to test. He turned on the stove, it started, pr…
-
I am using PyDAQmx to measure temperatures via thermocouples and a NI 9213 board. I am using the normal thermocouple DAQmx call: http://zone.ni.com/reference/en-XX/help/370471W-01/daqmxcfunc/daqmxcrea…
-
Hey! I found this library because I am working with the Ocean Controls KTA259V3. I've downloaded your MAX31855 Library as well as this one and I can not seem to get the sample code to report temperatu…
-
I'm not sure if this is a bug or operator error.
I have tried many combinations of setting up the thermocouple for the E3D V6 hotend on the Bigtreeteck MKR Pro board. I am using the thermocouple ampl…
-
Hi! first of all thank you for sharing your project.
I have a Kiln with 2 heating elements and a controller that has to be set up mannually and would like to use PiLN to replace it so I can Program …
-
I recall there being consensus for:
* 10hz retention of flux sensor data
* 30-min output for calculated fluxes and averages of meteorological & soil data
* 15-min output for averages of select me…
-
According to [datasheet](https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf), page 8, max31855 assumes a linear relationship between temperature and voltage, which is not accurate. For accurate…