-
When accessing 16 bit registers like counters on an 8 bit AVR core, these accesses have to be split into two 8 bit register writes. To do this, the peripherals have a TEMP register that the CPU automa…
-
When trying to flash an ATTiny412 directly from the CLI using a pre-generated .hex file, I receive the following error:
```
$ python3 ./prog.py -d attiny412 -wd 1 -u /dev/ttyUSB0 -a write -f ./ATT…
-
This is my first post so please excuse me if I have done some mistakes or did not follow the rules of a post.
My below code is working well on Arduino UNO but it is not working on AVR128DA48 Curiosit…
-
Not sure if there's actually a way to fix this one if I'm right about what's wrong, but going to put it here for reference anyway.
I have an AVR32DB32 running with VDD = 5V, and have MVIO enabled a…
-
It seems like Pymcuprog can read a byte from (an undocumented?) memory section that can be used to determine which silicon revision the chip is. If you're struggling with a weird bug in the MCU progra…
-
Hello @SpenceKonde and thanks for your excellent work!
Would you please provide the board manager URL via HTTPs, e.g., by applying [Let's Encrypt](https://letsencrypt.org/getting-started/)?
Than…
-
Hi
Suspicious bug when using AVR32DD20 and AVR64dd20 with MILLIS_USE_TIMERA0 option
Issue between wiring.h and timer.h (only for 20PINS ITEMS)
It look like CPU speed is ignored to set the rig…
-
I followed the Serial programming instructions, however I am trying to use the CP2102 (its what I currently have in hand). I set the baud rate 57600, and wired according to the schematic you provided.…
-
ATtiny104 Xplained Nano
I have this card, can I program it with attiny core?
How should I configure this card?
Which mcu supports attiny? is there a list of all supported mcus?
-
I am working on automating interrupts with time interval. I found that TimerOne is a good library for it but it is not working with Atmega 4809. Here is link to the library (https://github.com/PaulSto…