-
# Cahier des charges
- Bouton (type toggle switch) pour choisir la couleur du robot.
- Leds monochromes pour indiquer la couleur de l'équipe du robot (cette année : orange et vert)
- Gestion d…
-
```
What steps will reproduce the problem?
1. Connect two TimerMilliC's (virtualized from the same HW timer) to a module.
Upon firing, they should each toggle a separate LED.
2. Have that module sta…
-
```
What steps will reproduce the problem?
1. Connect two TimerMilliC's (virtualized from the same HW timer) to a module.
Upon firing, they should each toggle a separate LED.
2. Have that module sta…
-
```
What steps will reproduce the problem?
1. Connect two TimerMilliC's (virtualized from the same HW timer) to a module.
Upon firing, they should each toggle a separate LED.
2. Have that module sta…
-
```
What steps will reproduce the problem?
1. Connect two TimerMilliC's (virtualized from the same HW timer) to a module.
Upon firing, they should each toggle a separate LED.
2. Have that module sta…
-
Hello,
- hardware : Lenovo E16 gen1 Intel platform
- Linux Mint LMDE 6 faye / Cinamon 5.8.4 / Linux kernelBluetooth 6.1.0-13-amd64
**Issue**
Mic mute led located on Fn+F4 key is not turned on wh…
-
Iam using HLC together with Rhasspy 2.5.10.
This Pi3a+ is configured as satellite.
GPIO 14/15/18 are connected to simple LED's.
I experimented with clientId, but it seems to have no effect.
What I…
-
Hello,
thanks for the great work!
I'm tinkering with the 120-4 Relays EU version, and I figured out to enable the 4th channel touch on the yaml.
FYI, touch positions are mapped as follows:
…
umbex updated
1 month ago
-
```
What steps will reproduce the problem?
1. Connect two TimerMilliC's (virtualized from the same HW timer) to a module.
Upon firing, they should each toggle a separate LED.
2. Have that module sta…
-
**Reported by manuelbi on 2006-08-15 20:53 UTC**
Currently, the LEDs are hardcoded in openMSX. But LEDs
are part of the MSX hardware and some hardware has
other types of LEDs than other. (E.g.: turboR…