-
Are we ready for v1.7.0? If so, I'm proposing it happens.
-
I'm getting the following error when running a scan:
```
Pi.Alert 2.54 (2021-01-13)
---------------------------------------------------------
Scan Devices
ScanCycle: 1
Timestamp: 2021-…
-
Hello everyone. First of all sorry for my english. It's not perfect and I will try to do my best.
Like the title says, every time I launch a new print my printer (Creality Ender 3) power off after fe…
-
## The problem
Added and removed the TP-Link integration multiple times but only getting 6 out of 8 switches to show up in HA.
## Environment
- Home Assistant Core release with the issue:…
-
I can not get tp link plug in to work with hs100.
I have connected them on same router, same 2.4ghz, I can see them both on the ROG AX11000.
So IP is correct, connection is correct.
For sure I…
-
When performing the test alert scan, I get the following error.
```
pi@raspberrypi:~ $ python ~/pialert/back/pialert.py 1
Pi.Alert 2.52 (2021-01-11)
-------------------------------------------…
-
I have my printer connected to an OctoPrint host, and a TP-Link HS100 smart switch. I normally control the power to the printer using OctoPrint to control the smart switch. Now that we have custom m…
-
**Home Assistant release with the issue:**
Since 0.91
**Last working Home Assistant release (if known):**
0.90 but im not sure. It's right after the integration.
**Operating environment …
-
## The problem
Just upgraded to 0.105.2 and none of my smart plugs hs100 are available. Showing all three as unavailable. Should show them available.
## Environment
- Home Assistant…
Kisty updated
4 years ago
-
## The problem
With an active TP-Link integration and one HS100 power switch: When HS100 is offline for a while, and HA core is restartet, http/frontend does not load. Does not recover or enter s…