-
I spent some time reverse engineering the communication of Endura App and the device
I am able to change the trigger, start timer (Level 1-4 for XX minutes), start fireplace function if no special …
zozzi updated
11 months ago
-
**Describe the bug**
gamemode tries to maximize performance of CPU (and GPU, I/O etc) for games. For the CPU it can be done with 2 major parameters : the governor and the frequency boost (Turbo Boost…
-
Hello
The command arm_boost=1 in config.txt
Does not work it does nothing
this command allows the default turbo-mode clock to be increased from 1.5GHz to 1.8GHz
Is there any workaround for…
-
C4 finding submitted: (risk = 1 (Low Risk))
Slurp function may revert when it shouldn't
# Lines of code
https://github.com/code-423n4/2022-02-tribe-turbo/blob/main/src/TurboSafe.sol#L260
# Vulnerab…
-
Values:
- [x] Boosts and Mini-Turbo Charges
- [x] Directional and Engine Speeds
- [x] Lap Splits
- [x] Position
- [ ] #47
- [x] Race Completion Data
- [ ] #40
- [x] Velocity (and its variants)…
-
# Use custom errors
Solidity ^0.8.4 allow the use of custom errors to optimize gas usage.
https://blog.soliditylang.org/2021/04/21/custom-errors/
# Get id before push
There is no need to subtract
ht…
-
That way people can download tunes that are similar to the setup they have or closest available tune for the ecu. As a starting point. I spent so much time learning the software and was blindly changi…
-
### The problem
When using the Midea Climate IR component with a receiver, the receiver is not suppressed while transmitting. As a result, toggle values (such as "turbo/boost") are not reflected on t…
-
I'm interested to see where the new addition will go.
Would it be possible to have the boost tracked inside the HUD?
-
请问R4S稳定使用的频率是多少？
> CPU 性能优化调节设置
设置路由器的 CPU 性能模式
Policy 0
Policy 4
待机 CPU 最小频率
最大 Turbo Boost CPU 频率
ghost updated
3 years ago