-
Relayed from google-group:
> Hi again from Adam Kb2Jpd in Brooklyn NY
>
> Thank you for your prompt response to your group.
>
> There is a opportunity for you to make legitimate your patches for th…
dg9vh updated
8 years ago
-
Take a look at https://wiki.dg9vh.de/dmr:tytera_tyt_md-380:experimentelle_firmware_von_travis_goodspeed_-_kk4vcz
Maybe you'll refer at it in README.md for german-speaking-users.
I would take this pa…
dg9vh updated
8 years ago
-
As previously discussed in #146, hardware that ships with D013.009 is incapable of running earlier firmware. We need to know why, and we need to get our patches running on the new hardware.
Use this…
-
The app should be able to flash firmware images in Tytera's standard format.
-
Im using cgwin but i cannot create new firmware at end i have an error
"arm-none-eabi-gcc -g -O2 -Wall -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 -ff…
-
I've fresh installed a Debian Jessie,
during Make I have this error:
../../md380-fw --unwrap ../../firmware/D002.032.bin unwrapped.img
DEBUG: reading "../../firmware/D002.032.bin"
Traceback (most re…
-
After flashing my MD380 with the latest version, I occasionally have a blank display.
When the display becomes blank (just blue backlight), RX and TX work well.
I cannot reproduce the problem: it hap…
on8vm updated
8 years ago
-
when trying to write users.csv to a MD380 UHF I get
SPI Flash ID: 10 dc 1
local variable 'size' referenced before assignment
I think this part is responsiible
def flashgetid(dfu):
buf=dfu.spifl…
-
Chirp data sources for DMR-MARC's data dump would allow repeaters to be automatically loaded.
http://www.dmr-marc.net/cgi-bin/trbo-database/datadump.cgi
-
Forward port the "scanning" patches, listen to all talkgroups and all private calls, to the current firmware version D2.034.
The current patches are against firmware version 2.032.
Issue dded for tr…