-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
AFAIK, the Particle Electron does not use a SARA-U201 module, it uses SARA-U260 / U270 modules, and the 2G variant uses a G-series module.
(too bad I can't get an Electron with U201...)
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
Hey guys!
Well I have an M8N GPS that didnt worked out of the box with my pixhawk.
I got no GPS signal at all.
So I used a USBSerail bridge and connected it directly to the computer.
I used u-center …
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
1. Not obtain position solution from ublox m8t using rtknavi in windows platform.
2. In rtkrcv , it shows ./rtkstart.sh: permission denied.
Command execution error: ./rtkrcv.sh (32256)
Rtk server …
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…