-
**Running your example code for the cloudapi I get these errors right after starting the node app.**
ALSA lib control.c:953:(snd_ctl_open_noupdate) Invalid CTL …
-
Man muss in der Default-Konfiguration der 0.1.2 auf LAN0 das PoE und auf LAN1 das WAN anschließen. Das ist sehr unpraktiisch weil ja nur eine Leitung zum Router nach draußen gehen soll. Außerdem ist e…
moenk updated
4 years ago
-
### Host operating system
`Synology`
### What tag are you using
`beta`
### What complete docker command or docker-compose.yml do you use to launch the container (omitting sensitive values)…
-
Why doesn't Freifunk Berlin try to incorporate their packages into Gluon?
Having separate projects is much double-work. By joining efforts we could build better firmware.
-
@NeoRaider's recent contribution of the network regeneration got merged (thanks to all involved!)
and if I'm not mistaken, we've agreed on testing the devices that were gone again, as if we'd be addi…
-
Sorry this post has changed a bit as I've narrowed down the issue....
This device has a weird issue where it can't survive a cold boot or install with -factory with 22.03-rc6/git master.
Factor…
-
As unifi just released 1.11.0 official firmware.
I just want to confirm that if it is safe to upgrade to 1.11 if I still want to use updated podman or I have to stay at 1.10?
-
半年之前用lede编译的er-x固件都正常工作,今天用新源码重新编译了一下,更新后eth0网口无法驱动,网卡指示灯都不亮,看日志发现有一条错误是:mtk_soc_eth 1e100000.ethernet eth0: error -17 registering interface eth0
编译的内核版本是:5.4.224
-
*dangowrt:*
This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to r…
-
### Describe the bug
Current snapshot of OpenWRT won't boot on a Unifi Security Gateway. Tried with version 23.05.04 as well with identical results. USB drive setup exactly as described here: https:/…