-
Have installed dependencies, libusb...-dev, and libnetpbm...-dev and did build, ran make. Both the pearlfan and pearltest compile. When run pearlfan or pearltest as user, with sudo or as root get:
De…
-
```
Hello.
Is there kernel support for USB HID devices?
I have a Temper1 USB temperature sensor/logger that is detected as an USB FTDI
device. Any chance to get it detected as an HID device?
Thank y…
-
i'm using the latest code provided, sucessfully installed using dkms, but my dmesg output says:
[ 104.742456] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 104.891256] usb 1-3: Ne…
-
After three frustrating days I can finally get my Arduino Zero to move my mouse pointer. This has been a difficult transition from the UNO.
[1] The program port would not allow download, after some t…
-
I am trying to connect a keyboard to the LilyGO T-Display-S3 AMOLED as an input device using USB Host mode. However, I am encountering the following issues:
The USB DM and USB DP pins, which are me…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
This looked like an interesting project so I had a go at building it on NixOS. Seeing as SteamOS added a `/nix` directory in 3.5.5 NixPkg might be an interesting way of deploying this in the future! B…
-
> I rebased on master and force-pushed an identical change to libusb0.c.
> This was compile and runtime tested, but not confirmed to fix the issue since I can't repro. I intentionally set a wrong `us…
-
### Fill out information requested in this template, without doing so issue will be ignored & closed!
### Have you tried?
- [Searching through existing/closed issues](https://github.com/AdnanHod…
-
Hi,
I'm trying to configure USB OTG to make my Orange PI 5 Plus appear on a Windows host as an HID mouse. Despite my best efforts, my device reports in the system as USB Input with a problem. I tri…