-
### Batocera build version
39 2024/03/04 10:11
### Your architecture
GMKTec K6, AMD Ryzen 7 7840HS (8c/16t 3.8-5.1Ghz)
### Your Graphic Processor Unit(s) (GPU)
Integrated Radeon 780M
### Issue d…
-
**Describe the bug**
After following Mac install instructions (using [asdf](https://github.com/asdf-community/asdf-python) instead of pyenv) I am getting the following when running `python3 nut_gui.p…
-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…
-
When i connect the Fujifilm X-E3 via USB with the PC in "USB Card" mode and open rapid-photo-downloader, i get an error. This is probably similar to the other reported Fuji errors.
![Screenshot fro…
-
**Describe the bug**
Installation process resets and/or disables all USB devices when installing to an USB external device (case with SSD). It seems that it disables USB plugged drives/devices when i…
-
### Preliminary Checks
- [X] I use a modern operating system (Windows 7 with SP1 or newer)
- [X] I use the latest version of UCheck available (stable or beta version)
- [X] I checked that the iss…
-
When running this script `run_hfp_gateway.py` I manage to connect to the HFP but get as far as searching for the attribute list which is it tells me is none existent (incorrect). I've narrowed down th…
-
Using 0.6.16 SPI Flash uboot. Booting from USB 3.0 to SATA cable with SSD encounter below error around 50% chances.
Model: Pine64 Rock64
DRAM: 4 GiB
MMC: rksdmmc@ff520000: 0, rksdmmc@ff500000…
-
Entering into S3 is super slow, it takes about 15-20 seconds.
At first I thought it was caused by the iwlwifi module, but even if I remove it before sleep, it still takes a long time.
This happe…
-
If I unplug an unrelated USB device (an iPhone in my case), the scan freezes - no more packets are recorded. Stopping the scan and restarting it has no effect. You have to quit/restart KisMac2 befor…