-
Hi
First of all, this made my day when I found this, I've got a home built smoker and I've fiddled around with building also a esp-based thermometer, but I just don't get the readings stable enough…
-
Hi there! Many thanks for the great Enviro Indoor board!
However there seems to be something really fishy with my temperature reading, I've noticed that the onboard temperature reading is constant…
-
Made both of these changes and updated the timeout from 0.2 to 0.5 and still get failures every other read when running
while true; do sudo ./temper2.py; sleep 5; done
on an RPi 3 B+
Just invest…
-
There are many transmitters that have already been decoded and implemented in various projects. I have not had much luck getting my Accurite weather station or temperature sensors to detect correctly…
-
### Description
Add an option to perform the PID BED auto-tuning without using a USB connected device (OctoPrint, Pronterface, etc).
### Steps to Reproduce
As a follow-on to #60, we should al…
-
## Introduction
Recently I acquired a few of the Meawow MHO-C122 (2AWMOMHOC122) sensors for a bargain price.
Hoping I was able to scrape the sensor data from the advertisement or basic readout of so…
FaBjE updated
10 months ago
-
Since this device does not have lots of power it would perform poorly if you try to turn the temperature down using open loop control. eg.: it would not turn the power on when tip gets cold due to fac…
-
Meine sensore spoelen verrukt schon ein par Tagen die zeigen 500/500 an.
Habe meermaals die spannung
Aus und eingeschaltet aber es hilft nicht!
Was tun?
-
Hi Fabian,
first of all, thanks for this project.
I tried to use it in my RV with Truma Combi 4, but it don´t work.
My Truma Hardware is:
C4.01.01 / 0050.00
H1.02.00 / 0300.02
I tried with …
elojn updated
7 months ago
-
### What happened?
My Home Assistant is not able to open Zigbee2mqtt. I´ve setted it up yesterday and it worked fine. Today i wanted to add an device and now its not starting anymore. Does anyone has…