-
For each water dish:
Add Dip tool (for quick dip) in addition to the usual wash tool:
tools.water0Dip
tools.water1Dip
tools.water2Dip
For each paint color:
Add dip tool (for quick dip) in addition t…
oskay updated
11 years ago
-
Goal: Send SVG file to RoboPaint/CNCserver, and have it fully autopaint.
oskay updated
10 years ago
-
(The title may not be the best way to describe this issue.)
When the window is resized down, the WaterColorBot/RoboPaint logo should scale down as well, perhaps linked to be the same width as the can…
oskay updated
11 years ago
-
The Web App portion of the software can actually be hosted on a **totally external site** (at least the JS files that control it can), meaning that the clientside code could _always_ be the latest ver…
-
For expediency when brush is already inked with the correct color, but running dry:
Do not swish in the water, just dip, twice, quickly.
Do a single swirl around the paint dish.
oskay updated
11 years ago
-
[Title was: 'motion is jerky'] especially on sine fill
oskay updated
11 years ago
-
Currently, the cncserver is unable to run if no valid serial port is found.
It would be much nicer if the server were able to fail gracefully, and launch even if the EiBotBoard is not connected to …
oskay updated
11 years ago